P.C.B Dual Port R/A DSUB Connector / 8LE Series

BOARD MOUNT CONN. STACKER
Dual Port P.C.B. Mount Right Angle D-Sub Connectors.

eature
Designed to assembly two D-Sub right angle connectors to a dual port connector.
Stamped terminals suitable for P.C.B.
Insertion and intermateable with other standard D-Subminiature connectors.
with Thru holes and boardlocks two different types of mounting angle brackets are provided for your selection.
with 22.86 (0.900”), 19.05 (0.750”) and 15.88 (0.625”) three types of ports center are for your selection.
Metal front shells are provided to shield against EMI.
Available contacts are 9 & 25 positions.
Recognized UL under the component program of Underwriters Laboratories Inc. File No. E112081.

Electrical
Current Rating: 5 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 25 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material:
Plug: Brass.
Receptacle: Phosphor Bronze.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 9 25
Mating force (Kgf max.): 4.6 12.7
Unmating force (Kgf min.): 0.4 0.8

Straight P.C.B. Type Connectors / 8T Series

BOARD MOUNT CONN. STRAIGHT
D-SUB Straight P.C.B. Mounting Type Connectors.

Feature
The contact is a round pin and the pin insertion hole in the insulator is of the closed entry type, so that the connection is secure and reliable.
The contacts are precision stamped or machined.
Insulator is made of P.B.T. and glass fiber reinforced (UL94V-0) providing superior heat and chemical resistance.
Available contacts are 9, 15, 25, 37 and 50 positions.

Electrical
Current Rating: 5 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 15 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material:
Plug: Brass.
Receptacle: Phosphor Bronze.
Shell Material: Steel.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 9 15 25 37 50
Mating force (Kgf max.): 4.6 7.7 12.7 17.7 22.2
Unmating force (Kgf min.): 0.4 0.5 0.8 1.2 1.5

HD DSUB Straight P.C.B Connector / 8HT Series

BOARD MOUNT CONN. STRAIGHT
High Density P.C.B Mount Straight D-Subminiature Connectors.

Feature
The contact is a round pin and the pin insertion hole in the insulator is of the closed entry type, so that the connection is secure and reliable.
The contacts are precision stamped or machined.
Insulator is made of P.B.T. and glass fiber reinforced (UL94V-0) providing superior heat and chemical resistance.
Available contacts are 15, 26, 44, 62 & 78 positions.

Electrical
Current Rating: 2 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 15 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material:
Plug: Brass.
Receptacle: Phosphor Bronze.
Shell Material: Steel.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 15 26 44 62 78
Mating force (Kgf max.): 4.6 7.7 12.7 17.7 22.2
Unmating force (Kgf min.): 0.4 0.5 0.8 1.2 1.5

P.C.B R/A D-SUB Connectors / 8LA / 8LC /8LD Series

BOARD MOUNT CONN., RIGHT ANGLE
P.C.B. Mounting Right Angle D-Subminiature Connectors

Feature
Stamped terminals suitable for P.C.B.
Insertion and intermateable with other #22 D-Subminiature connectors.
Various mounting types are provided and easy for selection.
Insulator is made of polyester resin and glass fiber reinforced (UL94V-0) providing superior heat and chemical resistance.
Available contacts are 9, 15, 25 & 37 positions.
Recognized UL under the component program of Underwriters Laboratories Inc. File No. E112081.

Electrical
Current Rating: 2.5 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 15 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material:
Plug: Brass.
Receptacle: Phosphor Bronze.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 9 15 25 37 50
Mating force (Kgf max.): 4.6 7.7 12.7 17.7 22.2
Unmating force (Kgf min.): 0.4 0.5 0.8 1.2 1.5

HD DSUB P.C.B R/A Connector / 8HL Series

BOARD MOUNT CONN., RIGHT ANGLE
High Density P.C.B. Mount Right Angle D-Sub Connectors.

Feature
Stamped terminals suitable for P.C.B.
Insertion and intermateable with other #22 D-Subminiature connectors.
Metal front shells are provided to shield against EMI.
Insulator is made of polyester resin and glass fiber reinforced (UL94V-0) providing superior heat and chemical resistance.
Available contacts are 15, 26, 44, 62 & 78 positions.
Recognized UL under the component program of Underwriters Laboratories Inc. File No. E112081.

Electrical
Current Rating: 2 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 20 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material:
Plug: Brass.
Receptacle: Phosphor Bronze.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 15 26 44 62 78
Mating force (Kgf max.): 4.6 7.7 12.7 17.7 22.2
Unmating force (Kgf min.): 0.4 0.5 0.8 1.2 1.5

D-Subminiature Connectors / 8HC Series

CABLE END CONN. CRIMP
High Density Crimp D-Subminiature Connectors

Feature
8HC connectors based on international standards and interchangeable with other #20~ #26 D-Sub connectors.
The contacts can be mounted either on the front or rear of a panel or chassis.
This connector conforms to MIL-C-24308, where applicable.
Metal front shells are provided to shield against EMI.
Insulator is made of provided resin and glass fiber reinforced (UL 94V-0) providing superior heat and chemical resistance.
Available contacts with 15, 26, 44, 62 and 78 Positions.
Recognized UL under the component program of Underwriters Laboratories Inc.File No. E112081

Electrical
Dielectric Withstanding Voltage: AC 500 V min. (for 1 minute)
Insulation Resistance: 5000 M ohms min. (at 500V DC)
Workting Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass fiber reinforced (UL 94V-0).
Shell Material Steel, Tin or zinc plated.

D-Subminiature Connectors / 8C Series

CABLE END CONN. CRIMP
Crimp D-Subminiature Connectors

Feature
8C0 connectors based on international standards and interchangeable with other #20 D-Sub connectors.
The contacts can be mounted either on the front or rear of a panel or chassis.
This connector conforms to MIL-C-24308, where applicable.
Metal front shells are provided to shield against EMI.
Insulator is made of provided resin and glass fiber reinforced (UL 94V-0) providing superior heat and chemical resistance.
Available contacts with 9, 15, 25, 37 and 50 positions.
Recognized UL under the component program of Underwriters Laboratories Inc.File No. E112081

Electrical
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute)
Insulation Resistance: 5000 M ohms min. (at 500V DC)
Working Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: PBT and glass fiber reinforced (UL 94V-0).
Shell Material: Steel, Tin or Zinc plated.

Solder Type D-Subminiature Connectors / 8S Series

CABLE END CONN., SOLDER
D-SUB Solder Cup Cable End Connectors

Feature
The contact is a round pin and the pin insertion hole in the insulator is of the closed entry type, so that the connection is secure and reliable.
The contacts are precision stamped or machined.
Insulator is made of P.B.T. and glass fiber reinforced (UL94V-0) providing superior heat and chemical resistance.
Available contacts are 9, 15, 25, 37 and 50 positions.

Electrical
Current Rating: 5 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 15 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material: Brass.
Shell Material: Steel.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 9 15 25 37 50
Mating force (Kgf max): 4.6 7.7 12.7 17.7 22.2
Unmating force (Kgf min.): 0.4 0.5 0.8 1.2 1.5

HD DSUB Solder Connector / 8HS Series

CABLE END CONN., SOLDER
High Density Solder D-Subminiature Connectors

Feature
The contact is a round pin and the pin insertion hole in the insulator is of the closed entry type, so that the connection is secure and reliable.
The contacts are precision stamped or machined.
Insulator is made of P.B.T. and glass fiber reinforced (UL94V-0) providing superior heat and chemical resistance.
Available contacts are 15, 26, 44, 62 & 78 positions.

Electrical
Current Rating: 2 Amp
Dielectric Withstanding Voltage: AC 1000 V min. (for 1 minute).
Insulation Resistance: 5000 M min. (at 500V DC).
Contact Resistance: 20 m max. mated.
Operating Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: P.B.T. and glass-fiber reinforced(UL 94V-0).
Contact Material: Brass.
Shell Material: Steel.
Durability: 100 Cycles min.
Mating and Unmating force:
Contact numbers: 15 26 44 62 78
Mating force (Kgf max.): 4.6 7.7 12.7 17.7 22.2
Unmating force (Kgf min.): 0.4 0.5 0.8 1.2 1.5

I.D.C. Flat Cable Connector / 8F Series

CABLE END CONN., IDC
I.D.C. D-Subminiature Flat Cable Type Connectors

Feature
Suitable for connecting flat cable with center of 1.27mm (0.05?) and intermateable with other standard D-Subminiature connectors.
Designed with I.D.C. D-Subminiature contacts for fast, economical and reliable connections.
Standard connectors are fitted with pre-assembled crimping cover and strain relief.
Various mounting types are provided and easy for selection.
Metal front shells are provided to shield against EMI.
Insulator is made of polyester resin and glass fiber reinforced (UL 94V-0) providing superior heat and chemical resistance.
Available contacts with 9, 15, 25 &37 positions.
Recognized UL under the component program of Underwriters Laboratories Inc. File No. E112081and CSA LR 81373.

Electrical
Current Rating: 1 Amp
Dielectric Withstanding Voltage: AC 500 V min. (For 1 minute)
Insulation Resistance: 1000 M min.(at 500V DC)
Contact Resistance: 15 m max. mated
Working Temperature: -25ºC ~ +85ºC

Mechanical
Insulator Material: Polyester resin and glass-fiber reinforced (UL 94V-0)
Contact Material:
Plug: Brass
Receptacle: Phosphor Bronze
Contact Finish: Gold over nickel
I.D.C.Terminal Finish: Tin over nickel
Durability: 100 Cycles min
Wire Size: AWG 26or 28 stranded, 1.27mm conductor center flat cable
Mating and Unmating force:
Contact numbers: 9 15 25 37
Mating force(Kgf max.): 4.6 7.7 12.7 17.7
Unmating force(Kgf min.): 0.4 0.5 0.8 1.2