HDMI Type D Receptacle / 65UL Series

Board Mount Connector
Micro HDMI Type D Receptacle, Pitch 0.40 SMT Type, Shell Tail is Through Hole Type, Front solder tail is DIP and black solder tail is SMT type.

Feature:
1. Support highest video resolution 1080p.
2. Support 10.2Gbps all channel bandwidth.
3. Support 24bit all channel deep color.
4. HF Compliant.
5. Small volume, light quality, portable, can be applied to small mobile equipment, high definition video output effect.

Electrical:
• Low Level Contact Resistance (20mV ≤10mA)
• Initial: Contact≤10mΩ; Shell≤50 mΩ
• After test: Contact≤10mΩ;Shell≤50 mΩ
• Dielectric withstanding voltage
••Using 250V AC RMS(Mated 150V) dielectric withstanding voltage for one minute to test between adjacent contacts.
••Using 500V AC RMS (Mated 150V) for one minute to test the Insulation Resistence between adjacent contacts, 100MΩ Min(Mated 10MΩ Min).

Mechanical:
•• Mating and unmating force
•• Initial: Mating force 4.5Kfg max; Unmating force 0.6~2.5Kfg.
•• Final: Mating force 4.5Kfg max; Unmating force 0.6~2.5Kfg.
•• Durability
•• The peak force shall be recorded maximum rate of 25±3mm per minute.
•• The mated specimen are tested 5,000 cycles between mating and unmating at a rate 100±50 per hour.

HDMI Type D Receptacle / 65G Series

Board Mount Connector
Micro HDMI Type D Receptacle, Shell tail is through hole, Front solder tail is DIP and black solder tail is SMT type.

Feature:
1. Support highest video resolution 1080p.
2. Support 10.2Gbps all channel bandwidth.
3. Support 24bit all channel deep color.
4. HF Compliant.
5. Small volume, light quality, portable, can be applied to small mobile equipment, high definition video output effect.

Electrical:
• Low Level Contact Resistance (20mV ≤10mA)
• Initial: Contact≤10mΩ; Shell≤50 mΩ
• After test: Contact≤10mΩ;Shell≤50 mΩ
• Dielectric withstanding voltage
• Using 250V AC RMS(Mated 150V) dielectric withstanding voltage for one minute to test between adjacent contacts.
• Using 500V AC RMS (Mated 150V) for one minute to test the Insulation Resistence between adjacent contacts, 100MΩ Min(Mated 10MΩ Min).

Mechanical:
•• Mating and unmating force
•• Initial: Mating force 4.5Kfg max; Unmating force 0.6~2.5Kfg.
•• Final: Mating force 4.5Kfg max; Unmating force 0.6~2.5Kfg.
•• Durability
•• The peak force shall be recorded maximum rate of 25±3mm per minute.
•• The mated specimen are tested 5,000 cycles between mating and unmating at a rate 100±50 per hour.

HDMI Type D Mid-Mount Receptacle CH=0.8mm / 65N Series

Board Mount Connector
Micro HDMI Type D Mid-Mount Receptacle, Sink Type, Front solder tail is DIP and black solder tail is SMT type, CH=0.8mm.

Feature:
1. Support highest video resolution 1080p.
2. Support 10.2Gbps all channel bandwidth.
3. Support 24bit all channel deep color.
4. HF Compliant.
5. Small volume, light quality, portable, can be applied to small mobile equipment, high definition video output effect.
Electrical:
• Low Level Contact Resistance (20mV ≤10mA)
• Initial: Contact≤10mΩ; Shell≤50 mΩ
• After test: Contact≤10mΩ;Shell≤50 mΩ
• Dielectric withstanding voltage
••Using 250V AC RMS(Mated 150V) dielectric withstanding voltage for one minute to test between adjacent contacts.
••Using 500V AC RMS (Mated 150V) for one minute to test the Insulation Resistence between adjacent contacts, 100MΩ Min(Mated 10MΩ Min).
Mechanical:
•• Mating and unmating force
•• Initial: Mating force 4.5Kfg max; Unmating force 0.6~2.5Kfg.
•• Final: Mating force 4.5Kfg max; Unmating force 0.6~2.5Kfg.
•• Durability
•• The peak force shall be recorded maximum rate of 25±3mm per minute.
•• The mated specimen are tested 5,000 cycles between mating and unmating at a rate 100±50 per hour.

HDMI D TYPE Plug/ 65S Series

Cable End Connector
Carry all HDMI signals, including a TMDS link.
Compact size than type C.
Pitch 0.2 mm

Feature
HDMI Ethernet Channel – High-speed bi-directional communication not need a separate Ethernet cable. Speeds of up to 100Mb/sec. Internet sharing from one HDMI device to another will be possible as well.
Audio Return Channel- ( ARC) To deliver audio “upstream” from a TV to an A/V receiver , won’t need an extra cable for upstream audio transfers
3D support – To define common 3D formats and resolutions for HDMI-enabled devices”, up to 1080p.
4K x 2K Resolution Support – Huge resolution HD , including 3840×2160, 24Hz/25Hz/30Hz, and 4096×2160 24Hz
More Color Spaces – A better color on your television.
Electrical
Mechanical

HDMI D Type Plug Solder Type, with buckle / 65S series

Cable End Connector
Shell with rib, suffix cover with buckle , 34 or 36 AWG, (CABLE OD:5.0~5.5mm)

Electrical:
Contact Current Rating: 0.3A MIN
Voltage Rating: 40V AC (rms)
Witiistanding Voltage; 250Volts AC Between Adiacent Terminal(unmate) 150 Volts AC Between Adiacent Terminal(mate)
Insulation Resistance: 100Mohm MIN.(UNMATED);10Mohm MIN.( MATED)
Contact Resistance;30Milliohms MAX

Mechanical:
Insertion Force:44.1 N MAX
Withdrawal Force: 3N MIN ~ 25 N MAX

Environmental:
perating Temperature: -25°To +85°

HDMI D Type Plug Solder Type, Slim type / 65S series

Cable End Connector
Shell with rib, suffix cover with buckle , (36 AWG, Row Cable :5.6 * 1.2 MM)

Electrical:
Contact Current Rating: 0.3A MIN
Voltage Rating: 40V AC (rms)
Witiistanding Voltage; 250Volts AC Between Adiacent Terminal(unmate) 150 Volts AC Between Adiacent Terminal(mate)
Insulation Resistance: 100Mohm MIN.(UNMATED);10Mohm MIN.( MATED)
Contact Resistance;30Milliohms MAX

Mechanical:
Insertion Force:44.1 N MAX
Withdrawal Force: 3N MIN ~ 25 N MAX

Environmental:
perating Temperature: -25°To +85°

HDMI D Type Plug Solder Type / 65S series

Cable End Connector
Shell with rib, cable wire gauge, 34 or 36 AWG

Electrical:
Contact Current Rating: 0.3A MIN
Voltage Rating: 40V AC (rms)
Witiistanding Voltage; 250Volts AC Between Adiacent Terminal(unmate) 150 Volts AC Between Adiacent Terminal(mate)
Insulation Resistance: 100Mohm MIN.(UNMATED);10Mohm MIN.( MATED)
Contact Resistance;30Milliohms MAX

Mechanical:
Insertion Force:44.1 N MAX
Withdrawal Force: 3N MIN ~ 25 N MAX

Environmental:
Operating Temperature: -25°To +85°

HDMI D Type Connector Socket Solder Type /65S series

Cable End Connector
19 pins, Cable end Connector Receptacle Type, Sell with Rib

Feature:
1.Support highest video resolution 1080p.
2.Support 10.2 Gbps all channel bandwidth.
3.Support 24bit all channel deep color.
4.ROHS Compliant.
5.Small volume, light quality, portable, can be applied to small mobile equipment, high definition video output effect.

Electrical Character:
1.Low Level Contact Resistance (20mV≦10mA)
Initial:Contact≤25mΩ;Shell≤50 mΩ
After test: Contact≦30mΩ;Shell ≦50 mΩ
Current rating:0.3A per contact minimum
Voltage rating:40V AC (RMS)
Operating temperature:-25℃~+85℃

Mechanical Character:
1.Mating and unmating force
Initial:Mating force 4.5Kfg max;Unmating force 0.6~2.5Kfg.
Final: Mating force 4.5Kfg max;Unmating force 0.6~2.5Kfg.
2.Durability
The peak force shall be recorded maximum rate of 25±3mm per minute.
The mated specimen are tested 5,000 cycles between mating and unmating at a rate 100±50 per hour.

HDMI A to D Type Cable, w/ Ethernet W/ HEAC function

Micro HDMI Cable
Ethernet capability
With Audio Return Channel
High speed with HEAC function
Passed ATC test
Application : DVD, Set-Top Box, TV, PC, Mobile phone

Feature:
1.Designed to be used on small portable devices of HD camcorders, still cameras, PCs, PSS, HDTVs, DVD Players etc..
2.Provide a solid bridge to transfer information between micro HDMI receptacle and HDMI receptacle reliably and quickly
3.Idea for easy packing & travel

Electrical Character:
100% open & short test
Hi-Pot: DC 300V 0.01s
Insulation Resistance: 10M OHM Min
Contact Resistance: 3.0 OHM Max
Working Temperature: -25ºC ~ +85ºC

Mechanical Character:
Overmold: PVC 70Pa UL94V-0 Black
Premold: PE Low Density
Contact: Copper Alloy

HDMI CM TO DF 180 degree adaptor/ 1901180 series

Micro HDMI Adaptor

Feature:
1. Perfect solution and most convenience to connect in between both of your HDMI appliances via a HDMI cable.
2. HDMI type C to type D adapter for Moblie phone and other protable devices etc…
3. Easy to carry

Electrical character:
1. 100% open & short testing
2. Withstanding VOLTAGE: DC 300V 0.01Sec
3. Insulation resistance : 10M Ohms(Min)
4. Conductive resistance: 3 Ohms(Max)

Mechanical Character:
1. Insulator material: PVC UL94V-0
2. CONTACT: Copper Alloy