Board Mount Connector
DisplayPort SMT Type, 20pos, W/o Flange, Receptacle Connector
Housing pre-load are added to prevent produce conductor rebound and Improve product reliability
Shell spring is added and Contact with the customer’s panel to prevent the EMI phenomenon.
The spring chamfers on top and bottom of shell are the prevention of spring above the product top and bottom when male and female plug together.
RIB is added from Product shell tail to prevent floating when soldering.
Product DIP tails are increased 0.50 mm & two slots are added on housing bottom to avoid tin cohere on shell tails to cause connector remove from PVC when soldering.
Contact Current Rating: 0.5A Min
Voltage Rating: 40V AC(rms)
Withstanding Voltages:500V AC (for 1 minute)
Insulation Resistance: 100M ohms Min.
Contact Resistance: 30m ohms Max.
Working Temperature: -25ºC ~ +85ºC
Insulator Material: High Temperature Thermoplastic (UL94V-0 rated)
Contact: Copper alloy
Insertion Force: 39.2N Max
Withdraw Force: 9.8N Min
Durability mating cycle: 10,000 cycles.